BE SURE TO CHECK OUT MY BLOG PAGES IN THE WHITE LINKS ABOVE!!!

Wednesday, February 23, 2011

Blacksmithing defined

WHAT IS BLACKSMITHING?

As a demonstrating blacksmith, travelling throughout the south-east and talking to people about my craft, I have found, to my surprise and dismay that a large percentage of the population have no idea what a blacksmith is or what a blacksmith does. This is most unfortunate because prior to the industrial revolution, the blacksmith was as common as grass in a hayfield.
So what is a blacksmith?
What is their historical signifigance?
Is there a place for the blacksmith in modern society?

#1
What is a blacksmith?
Webster's 1828 dictionary defines the blacksmith as follows:
"Blacksmith: A smith who works in iron, and makes iron utensils; more properly, an iron-smith."

Seeing that a "blacksmith" is "a smith who works in iron," we should also discover the meaning of the word "smith."

"Smith: Literally, the striker, the beater; hence, one who forges with the hammer; one who works in metals; as an iron-smith..."

So a blacksmith is a smith that works with iron, or in modern terms, steel.
The general method used to work the metal is to heat it in some sort of furnace or forge, and then use two elements to move and shape the metal. These two elements are force and resistance!

The force comes in the form of a hammer! I don't know if the first blacksmith tried using his hand as the source of force, but if so, he probably changed his mind pretty quick.
There are a wide variety of hammers for specific jobs like ball peen, cross peen, sledge, rounding, texturing, tooling, etc.
A cross peen or a sledge hammer is usually the preferred choice for a general work hammer. The general work hammers usually range from 2-4 pounds in weight, depending on the size and strength of the smith.

Left to right:
two-and-a-half-pound cross peen (texturing hammer,) three-pound sledge (for general forge work,) four-pound sledge (for heavy forge work or when I'm feeling stronger than I really am,) two-pound ball peen tooling hammer (hardened tools mar the hammer face so I have a hammer dedicated to tooling,) one pound ball peen (for small work,) eight-ounce ball peen (on bottom: for really small work) 


The second element that is brought into play is resistance. If the blacksmith held the metal in the open air with nothing under it, he could hammer on it all day long and get nothing done! There must be something with mass, beneath the steel to provide a smashing resistance to each hammer blow. Whatever is placed beneath the steel to withstand this hammering, must be of sufficient strength and size to tolerate years of brutal and heavy use.
Over the years, blacksmiths improved the mass on which they hammered until the blacksmith anvil was born. The anvil can be simply a hefty hunk of metal, a rail-road rail, a flat piece of granite, or your older sister's head! (The last mentioned is certainly hard enough!)  
However, an efficent shape of anvil for the blacksmith's work is found in the London Pattern anvil, which is the type of anvil generally portrayed in our imagination. It is characterized by two key features: the horn and the face. The larger the anvil, the more resistance it provides, and the more efficient the blacksmith's individual hammer blows become.

This is an English-made Trenton "London" pattern anvil that weighs 86 lbs! 

This is another London pattern anvil that was made in America in the mid 1900's. It is a Fisher anvil, weighing 280 pounds!

This shows the two key features of the anvil.
The face is for general forge work and the horn is for curling or scrolling metal.


Employing these three elements - heat from the forge, force from the hammer, and resistance from the anvil - the blacksmith is able to move steel as he pleases according to his skill!
Pushing, pulling, flattening, smashing, rolling, welding, bending, rounding, enlarging, thinning.......IT IS ALL POSSIBLE!
Here is how the process works:

First the forge fire is lit. Coal is the fuel, and once it has caught fire, an air blast will get the fire somewhere around 2500 degrees Fahrenheit.
At the beginning of a long day's work, the craftsman carefully sifts the coal to remove impurities that melted out during the last fire, and also to remove excess ash which prevents the fire from getting as hot.
Cardboard or paper is used to get the fire started. The fire is contained in a small deep spot in the forge, known as the firepot! 

If started properly, the fire is up to temperature in about five minutes. A piece of metal is then slid horizontally across the firepot to begin heating it.

When steel has reached its proper forging temperature, it is white in color. New smiths (and sometimes experienced smiths) are prone to remove the metal from the fire and attempt to work it at a red or dull orange color. This takes too much energy and wears the smith out. A good habit is to be patient and allow the steel to reach a good white color. This is approximately 2000-2200 degrees. For finishing or smoothing metal, a cooler temperature is ideal. Steel begins to burn at around 2350 degrees, so it is not desirable to reach that temperature.



When steel is heated to such extreme temperatures, a sort of "instant" oxidation forms on the surface of the metal. This is called scale! Scale is literally flakes of metal that fall off the metal as it is being hammered. Another good habit to develop is to give the hot steel a quick brush off before beginning to hammer. This is not necessary, but it does reduce scale.

The most efficient brush for quick scale removal is a butcher block brush. It has wide flat teeth. The brush is pictured along with some scale in this next photo!

Once the metal is brushed, it is time to shape the metal as needed.

The end result is controlled by the smith as desired through an endless variety of hammer technique.
Taper!

Fish-tail scroll!

Plain taper scroll!

Penny-foot scroll!

Twist!

Scroll and collar joint!

In addition to the basic tools, there is a wide range of hand-held tools like chisels, punches, tongs, vises, and other tools used for forming, cutting, and shaping the steel. The tools can be so varied in shape and intended use that any one blacksmith would be hard-pressed to identify another smith's tools and their purpose. Many times, a tool must be fabricated for a specific job that the smith is faced with, and once that job is complete, the smith may never need the tool again.

Each tool stands at attention in its location. From use, the shop-owner memorizes the location of each tool, almost by feel, so that he can quickly access them for the job at hand.

Each tool has its own unique purpose and is shaped and patterned for that purpose!

Every blacksmith takes great pride in his work, knowing that it is distinctly unique from the next smith's work. The blacksmith signs his work in the form of a touchmark, which can be his initials or his shop name abbreviation. My stamp is a triple "F" for the "Fiery Furnace Forge" blacksmith company. In tools, it is often wise to stamp the type of steel that the tool is made from. (This is for future reference if the tool needs to be repaired or replaced.)
Here are some tools of mine, one marked "FFF  S" for my shop name and then "Spring" meaning that the tool was made from spring steel, and the other marked "FFF H13" since it is made from a special hard metal known as H-13. 

Other important tools include the blacksmith's trusty vise:

A swage block for forming difficult shapes like this shovel head swage:

And the smith's ever-growing assortment of tongs for holding hot metal!



Now,
What is the blacksmith's historical signifigance?

The blacksmith is a craftsman nearly as old as the world itself.....and let me specify that I am not talking about billions, or millions, or even hundreds of thousands of years.
The earth is around six thousand years old, give or take a few years, based upon the foundation of Holy Scriptures!
After proceeding only four chapters into the first book of the entire bible, we find the first blacksmith of sorts. Chronological study places this writing about 3900 years BC.






Gen 4:22
"And Zillah, she also bare Tubalcain, an instructer of every artificer in brass and iron: and the sister of Tubalcain was Naamah."
(Authorized King James Version of 1611)

Mr. Tubalcain is the first blacksmith mentioned, and quite probably the first blacksmith period.
You see, at the time, agriculture was the main occupation. This required tools to work the ground. Apparently iron and its value were discovered rather quickly and the blacksmith was born. 
Over history, every other craft and occupation began to require the blacksmith's work. 
Carpenters needed hammers, plainers, draw knives, drills, and nails. 
Woodsmen need axes, chain, and logging hooks.
Hunters needed swords, knives, and arrowheads. 
The armies of the day needed swords, daggers, shields, lances, spears, pikes, armour, etc.
Anyone that had need of a horse, had need of a smith to make buckles, saddle hardware, and shoes.
Anyone with a carriage, wagon, or horse-drawn sled, required the blacksmith's work for parts. 
Early cars and tractors could even be repaired by the blacksmith. 

Now here we need to make a distinction. A blacksmith was not the craftsman that made weaponry, horseshoes, or wagon parts. The same heating and hammering techniqes were used in these branches of blacksmithing, but the men who made these weapons and parts were not necessarily blacksmiths. 
Medieval weaponry was produced by the bladesmith.
Medieval armour was produced by the armourer. 
Wagon and carriage parts were produced by the wheelright.
The horseshoes were supplied and applied by the farrier.

Each of these branches of iron work shared the methods of the blacksmith, but the work itself was described in more specific terms.
The blacksmith was in charge of the creation of general farm hardware: hinges, latches, locks, nails, hammers, general tools, handles, gates, etc. etc!
As more items made from steel became mass-produced, the blacksmith had to take on more catagories of work until he was functioning as a farrier, wheelright, armourer, and bladesmith as well. 
However, the Hollywood impression of the blacksmith either putting shoes on horses or hammering out dozens of sword blades, simply is not historically accurate!
 
So now the question stands to be answered:
Is there a place for the blacksmith in modern society?
Well, if you are a blacksmith and you go to a social event after a day's worth of smithing, you'll smell like sweat and be covered in coal dust, so you will not have much of a place in modern society in that sense!
However, that is not what I am speaking of!
There is a place for the blacksmith in the modern world.
In doing the craft fairs, I have come across scores of people who say "oh look a blacksmith, there aren't many of them left!" 
OK! NEWS FLASH! Blacksmiths are NOT extinct! I am on a blacksmith forum with over 17,000 members worldwide, and it has well over 200,000 posts. 
Lost art? 
Just a few left?
Keep the craft alive? 
I've heard them all, but there are still many blacksmiths around. Just in our small town, I know of two full-time smiths, a learning smith, and a retired smith. In about a three hour radius of our place, I could name a dozen right off. 


But a lingering question may remain.
The military hasn't used armour or swords in a while; blacksmiths don't make tanks!
There aren't enough wagons rolling around to keep 17,000 blackmiths in work.
There aren't too many carpenters that get their hammers and tools from the blacksmith anymore, and doorknobs and locks can be bought for a few dollars by the hundreds.
What does a blacksmith do?


The modern-day, professional blacksmith creates ornamental, functional, and architectual iron work.
This work can range from a simple triangle dinner bell to large elaborately-designed gates and railings.



         

Anything is possible with hot iron! The idea is to create a quality piece that is distinctly unique from mass-produced items from China or elsewhere abroad! The blacksmith uses high quality solid steel in place of thin piping, solid forge welds and rivets instead of conventional welds, and elegant flowing scrolls instead of choppy and uneven curves.

All in all, the blacksmith and his craft are alive and well. As long as steel and coal is to be had, and time is here, the blacksmith will continue to work his metal with the forge, anvil, and hammer!

Isa 44:12
"The smith with the tongs both worketh in the coals, and fashioneth it with hammers, and worketh it with the strength of his arms:...."


Dave Custer
Blacksmith
Fiery Furnace Forge Blacksmith Company
http://www.custerfamilyfarm.com/

Tuesday, February 15, 2011

compressor has landed

Dad and I finally got the compressor off of the trailer today! It took about an hour of pushing, shoving, pulling, turning, sliding, and jacking to get it into place!
Tomorrow we are going to run the wiring and maybe I'll have a running compressor by tomorrow evening...Lord willing!

Thursday, February 10, 2011

welded horseshoe signs

I didn't get as much time in he shop as I had wanted today, but I did get the six horseshoe signs welded. It was a whole bunch of wire wheeling and welding.
I was cleaning and welding one sign about every 30 minutes! Talk about a boresome job though! WEW!

To start out with, here is a very good picture of me!

Ok, here are the actual signs! All clean, no rust, and welded together!


Close up!

Closer up!


A long time ago, I posted some pictures of me holding a little tiny, 6-week-old baby that mom keeps! Here is the picture that I posted before!
Now, here is a recent picture that I just thought was the greatest! (Yes she's wearing my hat....she isn't old enough to understand what happens inside that hat! ;)


Wednesday, February 9, 2011

Dinner bell jig and horseshoe signs

I made a jig or form for making my dinner bells on today!
It clamps in the vice and bends the triangle dinner bells cold. It saves me time because I don't have to heat the bells upto bend them!
Here are some pictures!

This is the triangle jig!

This is how the dinner bell stays in place while it is being bent!

This is the tool that is doing the bending! It is made from 1-inch solid round stock and the handle is 2 feet long.


This is a dinner bell in the jig about to be bent!

A hole in the handle for hanging the tool! Not exactly dead center!


Sort of switching gears here, I am getting ready for craft fair season and one of the things I am doing is the "Welcome" signs from horseshoes. I spent some of today working on getting some of the shoes straightened out for the "L's" and some bent around for the "O's." Then I matched the shoes up so that each sign looks proportional in its letter sizes.

Here are the shoes organized by letters.

Here they are sorted out!

Now each shoe has to be cleaned on the wire wheel and then the entire sign has to be welded together. These are not traditional pieces, so the electric wire welder will be used instead of traditional forge welding.



It's early to bed and early to rise for another day in the shop tomorrow. Tomorrow should see the "welcome" signs done, and hopefully four crosses as well.
All only if and as the Lord wills!
G'Night, God rest ye well, and may ye all have a "blissful time!" ;)








Shop work

Since I have installed my blacksmith shop indoors, there has been a 4x4 post in the way. We couldn't just cut it out because it was a load-bearing post....we take it out and my side of the barn collapses.
However, everytime I turned around, the post was in the way again. (Some of my witty, smart allek readers would say "well don't turn all the way around.")

Anyway, dad and I decided to take the post out and put a beam in.

In order to do this we had to first brace the ceiling and roof. We used two 6x6 posts to do this. Then we made the beam. The beam is made from two, 2 inch, by 12 inch, by 16 feet long boards. A 1/2" piece of plywood was placed between these two boards to make up the width that I needed. What we ended up with is a 16-foot-long beam, 12-inches wide, and 3 1/2 inches thick. That is a very large very heavy beam. After supporting the roof weight and removing the old 4x4 post, we installed the beam. The whole process took over half a day and six attempts before we got the beam in. However, now the post is gone, the beam is in, and as of right now, the barn is still standing!

This shows the beam in place and also shows the two 6x6 posts on either side supporting the roof weight! 

 Here is a general overview of my shop!


For those of you who had a hard time identifying the last picture on my last blog ......that is a picture of my big shop anvil!           ;)

Monday, February 7, 2011

A short mockery of evolution

The other day I was doing some digging for the concrete pad that I am going to pour for my air compressor to sit on. While I was digging, I came across a large amount of broken glass and a claw from some sort of animal.

Being the "full of fun" person I am, I decided to use the opportunity to have a short, well-deserved laugh at evolution.

So I am going to briefly take the stance of an evolutionist doing archeological research while digging in his barn.
Having discovered a tooth several inches below the top of the soil and in the same "fossil layer" with a large amount of broken glass, I can quite clearly make the following obvious assumption! 

Five to six MIIIIIIIIIIIILLION years ago, a half lion, half elephant, half deer (still trying to figure that one out, do the math,) commonly referred to as a lio-phant-eer, died here.
Unfortunately, the lio-phant-eer had died in an apeman's back yard. The day before, the apeman's evolving horse had finally developed it's flying abilities and so the fence no longer kept it in and horse-gull had flown away. Since the apeman no longer had the services of his horse-gull, he could not move the 100 ton lio-phant-eer. (Not really sure how he could have with the horse-gull anyway!) So the apeman buried the lio-phant-eer on the spot in a glass coffin.


Ok that's enough of being an evolutionist for me!
You want to know how we got here? OK I'll tell you!
"IN THE BEGINNING GOD....." Genesis 1:1

Why are we here you ask? I've got an answer for that too!
Rev 4:11
Thou art worthy, O Lord, to receive glory and honour and power: for thou hast all things, and for thy pleasure they are and were created."






Well I've been absent for a while! Updates on what I've been doing are due!
I've been looking at building or buying an enclosed trailer for craft fairs! Well, I found one at a good price and so this is what I have! It is a 12 footer, needs a little cleaning, paint, and shelves, but it is water-tight and heavy duty!






All of my regular readers know that I had a "Fiery Furnace Forge Blacksmith Company" sign made by my good friend Miss Nicole Hansard with Goat Wagon Sutlers! (http://www.freewebs.com/goatwagonsutlers/)
Well, I had a couple of warm days come through, so I put some clear coat on my sign to protect it. Then I thought about the sign she gave to me a while back. It is a smaller sign I use at craft shows that is on cedar and reads "Triple F Blacksmith." It was getting a little dirty and dusty, so I hit it with the 400-grit sand paper and coated it as well.
Both are looking great! Now I just need to make iron frames that are worthy to hold such nice pieces!




On the cedar sign, Miss Nicole took one of my forged leaves and did a similar trace-out of it! Looks better than the forged ones! 

I asked Miss Nicole to do the lettering on the larger sign free-handed instead of stenciled letters. She agreed, and I am very glad she did because I think the free-hand letters just made this sign! She also, at my request, added an elegant scroll on each side of the sign.


I'm now throwing around some design ideas for the hanger for the larger sign! This is my first drawing, though there will probably be modifications to this first design. 


THE END!

"